Plate Flange-CNDSFL-12
Plate Flange-CNDSFL-12
Plate flange is also named plain flange, flat flange and slip on flange etc. A plate flange is a flat, circular disk that is welded onto the end of a pipe and allows it to be bolted to another pipe. Typically used in fuel and water pipelines, the two plate flanges will be bolted together with a gasket in between them. The plate flange will have bolt holes all around the perimeter and will be used to create junctions, tees and joints.
parameter
• Size: 1/2”-60” 
• Design Standard: ANSI, JIS, DIN, BS,GOST 
• Material: Stainless Steel (ASTM A182 F304/304L, F316/316L, F321) 
• Normal Pressure: CLASS 150, CLASS 300, CLASS 600, CLASS 900,CLASS 1500, CLASS 2500, CLASS 3000 
• Face Type: F.F., R.F., R.T.J. ,M.F.,T.G. 




When building a pipeline, the length of the pipes used are not always known. By manufacturing the pipe separate from the plate flange, the welders can cut the pipe to length and weld a plate flange in place to join the pipes at any needed length. The plates can also be welded to the pipe on a slight bias, allowing two pipes to be joined that may not be precisely lined up.
 
plate flange designs are uniform in any given size regardless of materials used to create them. This allows a 6-inch (15 cm) black pipe flange to mate perfectly with a 6-inch stainless steel flange. The plate flanges will have a serrated finish on the inside mating surface, which allows the plate to seat into the gasket material. This ensures a perfect seal between two joining pipes.



For applications with no/low pressure at ambient temperatures, plate flanges are often a cost effective solution when raised faces and hubs are not necessary.

China leading Plate Flange(Plain Flange) manufacturer (www.dingshengflange.com) 
One-stop OEM and manufacturing for Plate Flange(Plain Flange) in Stainless Steel
 




Check out our full product catalog for more.